back

Laser Magic

  Laser Magic System  |  Amplifier K 101  |  Combiner K 102  |  PLL-Synthesizer K103  |  System Controller K 104

    Laser Magic System

      Laser Magic is a new advanced modulation system for the intensity control of the spectral resolution of white light lasers.
   
The new system no longer requires the separation of the optical wavelengths through discrete channels. The modulation of the individual spectral parts takes place in an acousto-optic crystal. With this system all optical wavelengths remain in one beam path. Difficult adjustments, such as existed in older mechanical systems, are eliminated. The intensity control is entirely electrical and not mechanical, which means it is free of inertia, resulting in almost unlimited speed.
  Product Information Laser Magic: brochure.pdf 65KB   
  System Overwiew Laser Magic: brochure.pdf 71KB   
   

 top

 

 

    Low Distortion Amplifier K 101

      Landwehrs K 101 linear amplifier/driver is characterized by its extremely low distortion and wide bandwidth. This performance guarantees multi signal operation with low intermodulation. The amplifier K 101 is as well an active 2:1 power combiner. The two input channels of the K 101 are amplified to an adequate rf-power signal to feed an AOTF. The maximum power output level is limited as a protection for the acousto-optic device. These AOTF drivers are designed for industrial applications as well as for university research.
  Amlifier K 101: brochure.pdf   73KB   
   

 top

 

 

    Combiner CB 4:1   K 102

      Landwehrs K 102 passive rf-power combiner is characterized by its extremely low distortion and wide bandwidth. This performance guarantees multi signal operation with low intermodulation. The K 102 combines four output signals from Landwehrs PLL-synthesizers K 103. The sum then feeds one of the inputs of the low distortion power amplifier K 101.
   
These CB 4:1 combiners are designed for industrial applications as well as for university research.
  Combiner CB 4:1   K 102: brochure.pdf  88KB   
   

 top

 

 

    PLL-Synthesizer K 103

 

    The PLL-synthesizer K 103 is a fully frequency synthesis generator. The output frequency of this device is derived from a phase locked loop system. The PLL-synthesizer K 103 is programmable over a very broad frequency range. The fine frequency raster of the generator allows to drive an acousto-optic tunable filter very precisely at its best operation frequency. 
   
The output signals of different synthesizers K 103 are combined by a CB 4:1 K 102 and amplified by the low distortion amplifier K 101 to an adequate level to drive an AOTF.

  PLL-Synthesizer   K 103: brochure.pdf  99KB   
   

 top

 

 

    System Controller K 104

 

    The system controller device K 104 is a new type of microprocessor unit which allows standard interface operation. This microprocessor controls and programmes up to 8 di fferent synthesizer oscillators K 103 to their specific operating frequency. The K 104 has different input and output interfaces e. g. for a temperature sensor or a shutter. This performance makes it ideally suitable for a wide range of applications.
   
The operating system of the microprocessor unit K 104 offers a programming of the complete system via RS 232 connector and a personal computer, a terminal or it runs by itself without any input from external devices.

  System Controller   K 104: brochure.pdf  85KB   
      Programming Manual K 104: pr-manual.pdf  19KB   
   

 top

 

back